Igama lemveliso kunye nohlobo: Ifilimu ye-antistaticYm30 uthotho
Iimpawu eziphambili zemveliso
I-primer eyodwa okanye iphindwe kabini, umsebenzi omkhulu we-antisttic kwaye kunzima ukulibazisa, ukunyamezelana okugqibeleleyo, unyamezelo oluhle, umgangatho omnandi.
Isicelo esiphambili
Isetyenziselwa ifilimu yokukhusela i-antistatic, i-antistatic paste ifilimu (i-antistatic, ubungqina bothuli).
Ulwakhiwo
Ishiti yedatha
Ubungqingqwa be-Y30 kubandakanya: 38μm, i-50μm, i-75sm, i-100μm kunye ne-125μm, njl.
| Ipropathi | Iyunithi | Ixabiso eliqhelekileyo | Indlela yovavanyo | ||
| Ubukhulu | μm | 38 | 50 | I-ASTM D374 | |
| TENSILE STRENGTH | MD | Mpa | 254 | 232 | I-ASTM D882 |
| TD | Mpa | 294 | I-240 | ||
| I-elongwation | MD | % | 153 | I-143 | |
| TD | % | 124 | I-140 | ||
| Ubushushu Shoinkige | MD | % | 1.24 | 1.15 | I-ASTM D1204 (150 ℃ × 30min) |
| TD | % | I-0.03 | -0.01 | ||
| Ukusebenza kwengqumbo | μs | - | I-0.32 | I-0.28 | I-ASTM D1894 |
| μd | - | I-0.39 | I-0.29 | ||
| Ukudlulisa | % | I-93.8 | I-92.8 | I-ASTM D1003 | |
| Haze | % | 1.97 | 2.40 | ||
| Ukuyenzeka okungaphezulu | Ω | 105-10 | I-GB 13542.4 | ||
| Ukukhawuleza okunamathela | % | ≥97 | Iindlela ze-lattice | ||
| Ukumanzisa uxinzelelo | I-Dyne / cm | I-58/58 | I-58/58 | I-ASTM D2578 | |
| Imbonakalo | - | OK | Indlela ye-EMTCO | ||
| Intetho | Ngasentla ngamaxabiso aqhelekileyo, hayi amaxabiso. Ukuba abathengi baneemfuno ezizodwa, ngokokusetyenziswa kwemvumelwano yobugcisa. | ||||
Uvavanyo lwempungutye lusebenza kuphela kwi-corona ephethwe yifilimu.
I-YM30 CUPER ibandakanya uYM30, YM30A, YM31, zahlukile kwi-primer.
IXESHA LOKUQALA: UPE-03-2024
