Igama leMveliso kunye noHlobo:Ifilimu esisisekokuba OCA Ukukhutshwa Film GM60 Series
Iimpawu eziphambili zeMveliso
ucoceko oluphezulu, uburhabaxa obusezantsi, ukutyeba okugqwesileyo, ukuzinza kwe-thermal, inkangeleko enkulu.
Isicelo esingundoqo
Isetyenziselwa ifilimu ye-OCA.
Ulwakhiwo
Ifilimu esisisekokwi-OCA Releas Film Structure Diagram
Ishiti yedatha
Ubukhulu beGM60ibandakanya: 38μm, 50μm, 75μm, 100μm kunye 125μm njl.
| IPROPATI | IYUNITHI | IXABISO ELIQHELEKILEYO | INDLELA YOVAVANYO | ||||
| UKUTYA | µm | 38 | 50 | 75 | 100 | I-ASTM D374 | |
| TENSILE STRENGTH | MD | MPa | 210 | 203 | 214 | 180 | I-ASTM D882 |
| TD | MPa | 255 | 239 | 240 | 247 | ||
| UBUDE | MD | % | 160 | 126 | 135 | 151 | |
| TD | % | 118 | 105 | 124 | 121 | ||
| UBUSHUKUMA UBUSHUSHU | MD | % | 1.3 | 1.4 | 1.2 | 1.2 | ASTM D1204 (150℃×30min) |
| TD | % | 0.5 | 0.5 | 0.5 | 0.1 | ||
| I-COEFFICIENT OF FRICTION | μs | - | 0.47 | 0.45 | 0.43 | 0.38 | I-ASTM D1894 |
| μd | - | 0.41 | 0.36 | 0.35 | 0.33 | ||
| UKUSASA | % | 90.3 | 90.2 | 90.1 | 90.1 | I-ASTM D1003 | |
| IHAZE | % | 3~6 | 3~6 | 3~6 | 3~6 | ||
| UKUMANZISA UXINKO | idayi/cm | 52 | 52 | 52 | 52 | I-ASTM D2578 | |
| INKCAZELO | - | OK | INDLELA YE-EMTCO | ||||
| PHAWULA | Phezulu ngamaxabiso aqhelekileyo, hayi amaxabiso aqinisekisiweyo. | ||||||
Uvavanyo loxinzelelo lokumanzisa lusebenza kuphela kwifilimu ephethwe yi-corona.
GM60Uthotho lubandakanya i-GM60, GM60A, GM60B.Inkungu yabo yahlukile.
Sineqela lobuchwephesha elinokubonelela ngeemveliso ezilungiselelweyo kunye nezisombululo ngokweemfuno zabathengi kunye nokulungisa ezona mveliso zifanelekileyo kubathengi. Ukongeza, sigxile kuphando lwemveliso kunye nophuhliso kunye nezinto ezintsha, ngokuqhubekayo silungiselela iinkqubo zemveliso, kwaye sizame ukubonelela abathengi ngeemveliso ezikumgangatho ophezulu. Ukuba unomdla kwiimveliso zethu zefilimu ezisisiseko, nceda undwendwele iwebhusayithi yethu: www.dongfang-insulation.com, kwaye unethemba lokufumana iimveliso ozifunayo apha.
Ixesha lokuposa: Sep-12-2024
